Often, the LG washing machine shows an OE error in the middle of the wash on the display. What is inconvenient: a full tank of water, the machine stops, and error 03 lights up on the board.
Also, the code may be displayed at the rinse stage. What to do in this case and how to fix the problem, you will learn in the article.
How to recognize a mistake
Not all Al Ji washing machines are equipped with a display. Electromechanically controlled models display an error code in their own way:
- All Rinse modes show an OE error by blinking or solid light.
- The “Spin” mode blinks (on) for 800 and 500 along with No Spin (800-500 revolutions, also “No spin”).
What does error 0E mean in the LG washing machine: a problem with draining the water. The system sends a signal to the drain pump to remove water from the tank. If within 5 minutes he fails and the machine is still full of water, the work stops and an error is issued.
Causes of the problem
Before fixing the problem, you need to find out what is the reason:
- A clogged drain system.
- Clogged sewer system.
- Failure of the pressure switch.
- The pump has broken.
- The defect of the electrical controller.
But do not rush to immediately disassemble the LG washing machine, first check the available systems.
What to do during the diagnosis
Before checking, drain the water from the Lji washing machine, empty the tank from the laundry. Then:
- Assess the permeability and integrity of the drain hose. Perhaps he is clogged or bent over. These are easily fixed problems at home.
- Often clogging occurs at the junction between the drain and the sewer. It is necessary to clean the area.
- Drain filter clogged. Its fine mesh retains various particles, it is better to rinse it under the pressure of water.
- There may be a malfunction in the control unit. To reset the OE error, turn off the LG CM for 15-20 minutes. If it did not work out to remove the error, read on.
When your attempts have failed, proceed with the search for the cause of the breakdown. The LG washing machine writes an OE error for the following problems: