The milling cutter Ryobi RRT1600-K is suitable for amateurs and professionals, it is used for manufacturing products of simple and complex configuration. Using the tool, they solve technical problems (making holes for door hinges, etc.), perform longitudinal curly cuts (baguettes, cornices, picture frames, etc.).
Advantages
Advantages of equipment:
- the ability to smoothly control the speed of rotation;
- the spindle is locked by a button, which provides quick replacement of the cutter;
- Using a ruler, the height of the cutting element is precisely set;
- smooth start of the engine affects the quality of milling;
- inclusion lock increases safety;
- the chip removal device keeps the working area clean;
- handles are rubber coated.
Design
Power tool device:
- The milling cutter along with the accessories is placed in a plastic case (case).
- Two rubberized handles on the sides of the case provide reliable and comfortable tool control.
- A ruler located on the side of the housing allows precise adjustment of the milling depth.
- It is possible to install a nozzle for a vacuum cleaner.
- The elevator mechanism provides a working stroke of the cutter - 55 mm.
- The dimensions of the collets allow you to set mills with a bore diameter of 6-8 mm.
- Screw caps are installed on both sides of the casing.They provide quick access to the motor brushes, which can be replaced within minutes.
- On the top cover there are ventilation holes, due to which heat is removed in a timely manner. This prevents the engine from overheating.
- A spindle speed controller is mounted in the left handle. The scale of speed is plotted on it.
- On the right handle are the start and lock buttons. After the unlocking position is fixed (the button is pressed), another button can start the engine.
- Two collets with inner diameters of 6 and 8 mm are included. A collet is mounted on the spindle, it is tightened with a nut using a wrench.
- To change the collet on the body there is a button for fixing the spindle.
- On the right side is a vertical ruler indicating the depth of milling. At the top there is a fine adjustment screw.
- The mill body easily moves vertically relative to the heel along two shock absorbing guides. The position of the cutter is fixed with a locking lever.
- In the supporting base of the device there are holes for mounting two guides of a parallel stop. The rods are fixed with screws. The parallel emphasis moves along the guides. The width from the edge of the wooden workpiece to the milling line is fixed with screws on the stop.
- A compass is fixed on one of the rods to make circular notches in the wood.
- A dust collector is installed in the opening of the heel with screws.
- A copy sleeve is attached to the holes.
Specifications
In the accompanying documentation attached to the delivery, the following operational properties are indicated:
- mains voltage consumption - 220 V;
- electric motor power - 1.6 kW;
- tool class - professional;
- spindle rotation speed - 10–26 thousand rpm;
- stroke height - 55 mm;
- collet inner diameter - 6 and 8 mm;
- weight - 3.85 kg.
Package Contents
The milling cutter is delivered in a small case in which the whole set is placed:
- milling cutter;
- two rods, parallel emphasis;
- roller insert for emphasis;
- compass;
- set of milling cutters - 5 pcs.;
- key for fixing the collet;
- plastic dust removal case;
- copy plate;
- spare brushes for electric motor;
- hexagon;
- two collets - 6 and 8 mm.
Recommendations for use, instruction
Instructions, download the .pdf file, size 7.99MB.
To ensure long-term operation of the tool, you must follow the rules:
- Store the router in a dry and warm room out of the reach of children.
- Do not leave the unit plugged in.
- It is necessary to periodically clean the external and internal surfaces.
Manufacturer and prices
The Japanese company Techtronic Industries is the world's largest developer and manufacturer of innovative power tools of the Ryobi trademark. Units are delivered to Russia from China and are manufactured at the enterprises of the Chinese branch of TTI.
Based on the analysis of offers on the market of woodworking equipment, a table of prices for the milling cutter was compiled.
Implementer | Cost, rub. |
"All tools" | 8500 |
"DNS" | 9300 |
Dealer Ryobi | 9250 |
"Regmarkets" | 8490 |
"Ryobi tools" | 9150 |
Reviews
Share your experience in using the machine in the survey and comments.